Pages

Monday 4 May 2015

DIY Rubber Stamp Tutorial


I have always wanted to have a go at making my own rubber stamp and decided to buy the equipment and have a go at making a stamp for my daughter's website name SLH Crafts. http://www.slhcrafts.com/ It was actually much easier than I expected and I will probably be having a go at making some more with the spare lino.

Requirements:

  • Crafters lino for carving (various options available to buy)
  • Lino cutters or scalpels
  • Pencil/Pen and paper if using patterns.
  • Glue
  • Afterwards - Ink for stamping




Instructions:

Step 1: Print off the text or picture you wish to copy.
Step 2: Outline the pattern with a pen/pencil.
Step 3: Turn the paper over so pattern is backwards esp if using letters, place onto lino and rub over the opposite side of the paper leaving a tracing mark onto the lino.
Step 4: If needed, go over the traced mark to make it more noticeable for cutting.
Step 5: Start carving out the design making sure not to carve the design itself.
Step 6: Once you have carved the design then cut the design from the lino and attach/glue to a wooden block or something similar to help with stamping.
Step 7: Practice using the stamp with some ink and if you need to make any adjustments then carve out any extra. (I noticed I had forgot to cut out the hole in the letter 'A' so had to carve extra until I got my desired design.







2 comments:

  1. Asalamu alaikum, Thanks for sharing, come and share some words of wisdom over at Purity & Impurity In Islam

    Take Care

    ReplyDelete
  2. Wa'alaikum salam. big thanks for karimascraft. many lesson that I got from this blog. May Allah always protect you all the time. aamiin

    ReplyDelete

I love to receive messages, I will try to reply as soon as possible.